Blog

Polycarbonate is the strongest and most heat-resistant material in common use for FDM 3D printing — tougher than ABS, far tougher than PETG, and able to survive temperatures that would deform every other filament on this list. It’s also genuinely difficult to print well, which is why most people don’t need it, even when it

PETG sits in the gap between PLA and ABS — stronger and more heat-resistant than PLA, easier to print and less smelly than ABS. It’s the material most people reach for once PLA starts feeling too brittle for what they’re actually building. Get the settings right and it’s a genuinely easy filament to work with;

PLA (Polylactic Acid) is the filament almost every 3D printer ships with a sample of, and for good reason — it’s the easiest material to print well, the most forgiving of beginner mistakes, and the cheapest to experiment with. If you’re trying to decide what to load first, the short answer is: PLA, and here’s

If you’ve just unboxed your first 3D printer, the honest answer is: start with PLA. It’s the easiest material to print, the most forgiving of a beginner’s mistakes, and the cheapest to experiment with while you’re still learning your machine. PETG and ABS both have real advantages, but neither is where you want to spend

# PLA vs PETG: Which Filament Should You Actually Print With? If you’re only going to keep one material on your spool rack, it’s probably PLA. If you need a second one for anything that has to survive real use, it’s probably PETG. That’s the short answer. The long answer is where most of the