Corners that warp, first layers that lift halfway through a 6-hour print, parts welded so hard to the bed you need a scraper to get them off — most of it comes down to bed adhesion. This pre-mixed adhesive handles both ends of the problem: it holds while the bed is hot and lets go once it cools.
Key Features
- Temperature-activated grip – adhesion switches on above 35°C and releases below 35°C, so finished prints come away once the bed cools.
- Pre-mixed and ready to use – no diluting or mixing. Apply straight from the bottle.
- Thin, even coat – spread with a paper towel for a consistent layer, without the ridges and clumps a glue stick leaves.
- Acts as a release layer – sits between the print and the build surface, reducing the risk of strong-bonding materials like PETG lifting the surface coating when you remove a part.
- 200ml bottle – only a few drops per application, so a bottle goes a long way.
How to Apply
- Clean the bed surface with warm soapy water.
- Rinse and dry it completely.
- With the bed cold, apply a few drops to the surface.
- Spread evenly across the print area with a paper towel.
- Refit the bed to the printer.
- Heat the bed to your normal print temperature — adhesion activates above 35°C.
- Once printing is done, let the bed cool below 35°C and the print releases.
Specifications
- Volume: 200ml
- Format: Pre-mixed liquid, spray bottle
- Activation temperature: Above 35°C
- Release temperature: Below 35°C
- Compatible surfaces: Glass, PEI and textured spring-steel build plates
- Compatible materials: PLA, PLA+, PETG and ABS
Why Vexil 3D Labs
Vexil 3D Labs is a South African 3D printing supplier and authorised ERYONE distributor. This adhesive is held as local SA stock, so you’re not waiting weeks on an overseas order for a bottle of bed glue. Add it to your next ERYONE or Creality filament order and fix first-layer problems before they cost you a spool.
Reviews
There are no reviews yet.