SA Filament Silk PLA+ Gloss Black 3D Printer Filament 1kg – 1.75mm

<p>SA Filament Silk Gloss Black PLA+ 3D printer filament delivers a deep, lustrous black
with a high-gloss silk surface that sets finished prints apart from standard filament results.
Built on an enhanced PLA Plus base for improved durability and heat resistance, this 1.75mm,
1kg spool is the straightforward choice for display models, decorative pieces, and artistic
prints where a premium surface finish matters.</p>

<h2>Key Features</h2>
<ul>
<li><strong>High-Gloss Silk Finish:</strong> Smooth, reflective surface straight off the
printer — deep black with a lustrous sheen that elevates display-quality prints without
any post-processing.</li>
<li><strong>PLA Plus Base:</strong> Enhanced formulation delivers greater impact strength
and a higher heat deflection temperature than standard PLA, while remaining just as easy
to print.</li>
<li><strong>Standard Temperatures and Speeds:</strong> Unlike traditional silk filaments
that can demand specific conditions, this PLA Plus prints at standard settings — no
specialist configuration required.</li>
<li><strong>Consistent Extrusion:</strong> 1.75mm diameter at ±0.05mm tolerance,
vacuum-sealed and boxed to preserve filament quality during storage and shipping.</li>
<li><strong>Flexible Bed Temperature:</strong> Performs across a wide bed temperature
range of 0°C–70°C — compatible with heated and non-heated build plates alike.</li>
</ul>

<h2>Recommended Print Settings</h2>
<ul>
<li><strong>Nozzle Temperature:</strong> 200°C – 230°C</li>
<li><strong>Bed Temperature:</strong> No heated bed required; up to 70°C if available</li>
<li><strong>Print Speed:</strong> [TBC — awaiting SA Filament confirmation]</li>
<li><strong>Cooling Fan:</strong> [TBC — awaiting SA Filament confirmation]</li>
<li><strong>Enclosure:</strong> Not required</li>
<li><strong>Drying:</strong> Not required for sealed spools. If the spool has been exposed
to humidity, dry at 50°C for 4–6 hours before printing.</li>
</ul>

<h2>Compatible Printers</h2>
<p>Compatible with all standard FDM 3D printers that accept 1.75mm filament, including
Creality Ender 3 (all variants), Creality CR-10, Bambu Lab A1/P1/X1, Prusa MK4, Anycubic
Kobra, Flashforge Adventurer, and most other FDM machines.</p>

<h2>Why Vexil 3D Labs?</h2>
<p>Vexil 3D Labs stocks filament locally in South Africa, which means faster delivery and
no waiting on international shipping. We carry a wide range of colours and finishes to suit
every project — from functional prints to display models and artistic pieces.</p>

<p><strong>Quality Guarantee:</strong> We stand behind every spool we sell. If your filament
does not meet quality expectations — whether it’s inconsistent diameter, poor layer adhesion,
or excessive breakage — contact us and we will replace your spool. No hassle, no debate.</p>