Creality Hyper PLA RFID Viva Magenta 3D Printer Filament 1kg – 1.75mm

Creality Hyper PLA Viva Magenta is built for high-speed printing. The high-flow formulation melts and extrudes cleanly at speeds where standard PLA starts to under-extrude, and the fast-cooling additive package lets each layer set before the next one lands — so a capable machine can run at several hundred millimetres per second without losing dimensional accuracy or surface quality.

Viva Magenta is a bold crimson-pink — Pantone’s Colour of the Year for 2023. It is far more vivid than a standard red or pink and makes an immediate visual statement on display pieces, signage and anything meant to be noticed.

RFID Spool: this spool carries an embedded RFID tag. On Creality machines that read RFID — the K2 series and CFS-equipped printers — the printer identifies the material, colour and recommended print profile the moment you load it, so there is no manual filament selection and remaining length is tracked accurately.

Speed Note: the printer is usually the limiting factor, not the filament. Ramp speed up gradually and check flow and layer bonding as you go rather than jumping straight to the maximum.

Key Features

• Bold Crimson-Pink: a high-impact tone that stands out where standard red reads flat
• Embedded RFID Tag: automatic material and colour recognition on Creality K2 and CFS-equipped printers
• High-Speed Formulation: high fluidity and fast cooling for clean extrusion at speeds up to 500 mm/s
• Low Warp: bonds readily to glass, PEI and textured build surfaces and resists lifting on open-frame printers
• Diameter Tolerance: ±0.03 mm for consistent flow and reliable layer adhesion
• Vacuum-Sealed Spool: packed with desiccant to protect against moisture in transit and storage

Recommended Print Settings

• Nozzle Temperature: 190°C – 230°C
• Bed Temperature: 55°C – 70°C
• Print Speed: 30 – 500 mm/s
• Cooling Fan: 100%
• Enclosure: not required
• Drying: not required for sealed spools

Compatible Printers

Hyper PLA is built for Creality’s high-speed machines — the K1, K1C, K1 Max, K2 Plus and Ender-3 V3 range — where it can run at full speed. It also prints perfectly well at standard speeds on any 1.75 mm FDM printer, including the Ender 3, Ender 5 and CR-10 series, Bambu Lab A1, P1 and X1 machines, Prusa i3 MK3 and MK4, Anycubic Kobra and Elegoo Neptune. A standard 0.4 mm brass nozzle is all you need.

Why Vexil 3D Labs

Local South African stock. This spool ships from our own shelves in South Africa. No import wait, no customs surprises and no exchange-rate guesswork — you order today and it goes out on the next courier collection, priced in Rand. We carry a wide range of colours and finishes to suit every project, from functional parts to display models.

Quality Guarantee: we stand behind every spool we sell. If your filament does not meet quality expectations — inconsistent diameter, poor layer adhesion or excessive breakage — contact us and we will replace your spool. No hassle, no debate.