ERYONE Silk PLA Dual-Color Black Red Green Purple 3D Printer Filament 4×250g 1.75mm

The ERYONE Silk PLA Dual-Color Combination Pack brings together four two-tone silk spools — Rose Red & Light Blue, Black & Red, Green & Black and Black & Purple. Each 250 g spool carries two colours side by side down the filament, so one extruder lays down a shifting two-tone finish with no filament swaps, no pauses and no multi-material hardware.

Three of the four spools pair a colour against black, which throws the contrast much harder than a light-on-light combination — the darker tone reads almost like a shadow while the colour catches the light. The Rose Red & Light Blue spool balances that out with a softer pastel shift for figures and decorative pieces.

Gradient Placement: where each colour lands on your model is not fixed and varies from spool to spool and print to print. Purge a short length of filament before starting if you want a particular colour to appear first, and expect every print to come out slightly different — that variation is part of the appeal of dual-colour filament.

Key Features

• Four 250 g spools, 1 kg total — Rose Red & Light Blue, Black & Red, Green & Black, Black & Purple
• Two colours in every spool for a two-tone finish on a single-extruder printer
• High-contrast black pairings for sharp definition on detailed models
• High-gloss silk surface that needs no post-processing
• 1.75 mm diameter with a ±0.03 mm tolerance for consistent extrusion
• Tangle-free winding on a recyclable cardboard spool
• Vacuum-sealed with desiccant to keep moisture out in transit and storage

Recommended Print Settings

• Nozzle temperature: 190–220 °C — run the upper end for maximum silk gloss
• Bed temperature: 45–60 °C
• Print speed: 30–70 mm/s — slower speeds sharpen the colour separation
• Cooling fan: 100%
• Retraction: 4–6 mm on Bowden setups, 0.5–1 mm on direct drive
• Enclosure: not required
• Storage: keep sealed with desiccant between prints

Compatible Printers

This filament is 1.75 mm and fits any standard FDM 3D printer, including the Creality Ender 3, Ender 3 V2, Ender 3 S1, Ender 5 and CR-10 ranges, the Creality K1 and K1 Max, Bambu Lab A1, P1 and X1 series, Prusa i3 MK3 and MK4, Anycubic Kobra, Elegoo Neptune and Artillery Sidewinder machines. A standard 0.4 mm brass nozzle handles it without modification. Spools are cardboard and fit both internal and external holders.

Why Vexil 3D Labs

Local South African stock. This pack ships from our own shelves in South Africa. No import wait, no customs surprises, no exchange-rate guesswork — you order today and it goes out on the next courier collection, priced in Rand.

Quality Guarantee: we stand behind every spool we sell. If your filament does not meet quality expectations — inconsistent diameter, poor layer adhesion or excessive breakage — contact us and we will replace it. No hassle, no debate.