The ERYONE Silk PLA Dual-Color Combination Pack puts four two-tone silk spools in a single box — Blue & Green, Red & Green, Red & Blue and Purple & Gold. Each 250 g spool carries two colours laid side by side down the length of the filament, so a single-extruder printer produces a shifting two-tone metallic finish with no filament swaps, no print pauses and no multi-material hardware.
The silk finish leaves a smooth, reflective sheen straight off the print bed with no sanding, priming or painting. Vases, dragons, display busts and articulated models pick up the colour shift especially well across curved surfaces and spiral-vase walls, where the two tones roll into one another as the layers climb.
Gradient Placement: the point at which each colour appears on your model is not fixed and varies from spool to spool and print to print. Purge a short length of filament before starting if you want a specific colour to land first, and expect every print to come out slightly different — that variation is part of the appeal of dual-colour filament.
Key Features
- Four 250 g spools, 1 kg total — Blue & Green, Red & Green, Red & Blue, Purple & Gold
- Two colours in every spool for a two-tone finish on a single-extruder printer
- High-gloss silk surface that needs no post-processing
- 1.75 mm diameter with a ±0.03 mm tolerance for consistent extrusion
- Tangle-free winding on a recyclable cardboard spool
- Vacuum-sealed with desiccant to keep moisture out in transit and storage
- Ideal for display pieces, cosplay props, gifts and colour test prints
Recommended Print Settings
- Nozzle temperature: 190–220 °C — run the upper end for maximum silk gloss
- Bed temperature: 45–60 °C
- Print speed: 30–70 mm/s — slower speeds sharpen the colour separation
- Cooling fan: 100%
- Retraction: 4–6 mm on Bowden setups, 0.5–1 mm on direct drive
- Enclosure: not required
- Storage: keep sealed with desiccant between prints
Compatible Printers
This filament is 1.75 mm and fits any standard FDM 3D printer, including the Creality Ender 3, Ender 3 V2, Ender 3 S1, Ender 5 and CR-10 ranges, the Creality K1 and K1 Max, Bambu Lab A1, P1 and X1 series, Prusa i3 MK3 and MK4, Anycubic Kobra, Elegoo Neptune and Artillery Sidewinder machines. A standard 0.4 mm brass nozzle handles it without modification. Spools are cardboard and fit both internal and external holders.
Why Vexil 3D Labs
Local South African stock. This pack ships from our own shelves in South Africa. No import wait, no customs surprises, no exchange-rate guesswork — you order today and it goes out on the next courier collection, priced in Rand.
Quality Guarantee: we stand behind every spool we sell. If your filament does not meet quality expectations — inconsistent diameter, poor layer adhesion or excessive breakage — contact us and we will replace it. No hassle, no debate.
Reviews
There are no reviews yet.